HI, AK and International customers: Please contact us for USPS and FedEx shipping options.
 
 
 
 
   
  BHP Tackle :: Wind-On Leader Tools - Topshot Tools - Spectra Rigging Needles :: Cutting & Crimping Tools

Ideal SpectraŽ Scissors
Jinkai MC-A Mono Cutter
Jinkai MC-T Mono Cutter
Genzo Cable Cutter
Nicopress 17-BA Crimping Tool
Nicopress 17-B4B Crimping Tool
Nicopress 33V-CGB4 Crimping Tool
Nicopress 510 Bench Crimper
HT-450 Hand Swaging Tool
HT-750 Bench Crimper

Ideal SpectraŽ Scissors

The last SpectraŽ scissor you'll ever buy. These serrated shears are super sharp and very precise. The finger ports are large, and the scissor easily cuts 1-100 pieces of spectraŽ with an extremely fine cut and no fray. Overall length is 6.5".
Jinkai MC-A Mono Cutter

The MC-A cuts the heaviest mono effortlessly with a perfect cut and no burrs. The tool is precision machined with heavy-gauge blades, teflon coated for smooth cutting, rust resistance, and long lasting sharpness. Patented oil-free pivot assures optimum matching of blades and enhances cutting power with its low friction sliding effect. The MC-A has a safety lock and contoured handle grips.
Jinkai MC-T Mono Cutter

The MC-T is unbeatable for close, precision trimming. The tool is precision machined with heavy-gauge blades, teflon-coated for smooth cutting, rust resistance, and long lasting sharpness. Patented oil-free pivot assures optimum matching of blades and enhances the cutting power with its low friction sliding effect. The MC-T has a safety lock and contoured handle grips.
Genzo G Cable Cutter

The Genzo G Cable Cutter is a must-have for every shark fisherman and cable rigger. This tool makes a clean cut in single-strand wire and multi-strand cable up to 800lb test, with no fray. Japanese manufactured from high carbon steel. The Genzo G is the tool of choice for professional wire and cable riggers worldwide.
Nicopress 17-2 & 17-BA Crimping Tool

The Nicopress 17-2 & 17-BA hand tool is designed for pressing oval and stop sleeves ranging from .012" through 1/32" (.26mm-.80mm). This is the tool used for making wahoo leaders with titanium wire, or crimping mono or fluoro from .70mm-1.05mm. The 17-BA tool will press Nicopress part # 17-1-B and 27-1-B oval sleeves.
Nicopress 17-B4B Crimping Tool

The Nicopress 17-B4B hand tool has two positions and will securely crimp 1/32" (B1) and 3/64" (B4) oval sleeves. Light weight and low cost, this 8" hand tool can be used with small diameter mono or fluoro from .75mm - 1.45mm. Refer to the Nicopress Sleeve Chart for exact matches.
Nicopress 33V-CGB4 Crimping Tool

The Nicopress 33V-CGB4 hand tool has three positions and will securely crimp 3/64" (B4), 1/16" (C) and 3/32" (G) oval sleeves. This 11.5" adjustable hand tool can crimp medium and large diameter mono or fluoro from 1.20mm - 3.0mm. The tool comes pre-calibrated from BHP and has a secure "locked-in" feature to prevent over-compression. The ultimate crimper for the serious offshore angler. Refer to the Nicopress Sleeve Chart and the Adjustment Manual.
Nicopress Model 510 Bench Crimper

The Nicopress Model 510 is manufactured from forged steel with specially hardened working surfaces. 22" long, the 510 is designed to create maximum sleeve compressions around the line, resulting in connections that are strong and reliable. Compression heads have either single or multiple marked pressing grooves matching similar marks on Nicopress sleeves. 'GO' gauges supplied with the tool assure accurate compression of sleeves. Interchangeable heads swap out easily and ensure accurate calibration. Heads sold separately. Refer to the Nicopress Sleeve Chart and the Adjustment Manual.
Nicopress Model 510 Interchangeable Tool Heads

The Model 510 bench crimper accommodates many interchangeable heads. Changing heads is easy; remove one bolt and a pin. The following heads cover the most common line sizes from 1.20mm through 2.86mm: 51-B4-887 (B4 sleeve); 51-C-887 (C sleeve); and 51-G-887 (G sleeve). Refer to the Nicopress Sleeve Chart.
HT-450 Hand Swaging Tool

A workhorse hand tool for all types of rigging. The heavy-duty five position precision jaws compress sleeves evenly every time. Handles sleeves from 0.8 to 3.3mm. An excellent offshore rigging tool for your boat or workbench. Now available in stainless steel! Click on the item# to select finish. Refer to the Adjustment Manual.
HT-750 Bench Crimper

The HT-750 Bench Crimper is ideal for multiple precise, repeatable crimping jobs that hand crimpers simply cannot do. The longer handle gives you increased leverage and crimping power - great for crimping large, bulky rigs. Six positions available: hole size 3.6mm to 7.0mm; sleeve size 1.7mm to 4.2mm. Refer to the Adjustment Manual.

 
home | bhp tackle | what they are | how they're made | mono wind-on guides | fluoro wind-on guides | cable wind-on guide | topshot guides | connections | wind-on tools | hollow spectra | hooks & rigs| spectra linewinding | contact us | sitemap

Š 2019 BHP Tackle, All Rights Reserved